Interpack IPG USA 20-B, Руководство по эксплуатации и список запасных частей

Страница: 15 / 39

UM062TW / UM562TW UDM10010-01
15
S
ET
-U
P
P
ROCEDURES
3) Width Adjustment Handle
The foldable handle that is
used to adjust the width of
the self-centering side rails
is located on the left hand
side of the machine.
Unscrew and change
sides.
Figure 6
4) Tape Loading and Threading
A) Tape Loading
W
ARNING
! T
URN OFF ELECTRICAL POWER SUPPLY AND DISCONNECT THE POWER CORD
FROM THE ELECTRICAL SUPPLY BEFORE BEGINNING TO WORK ON THE
T
APE
H
EADS OR TO LOAD TAPE
. I
F POWER CORDS ARE NOT DISCONNECTED
,
SEVERE INJURY TO PERSONNEL COULD RESULT
.
The HSD

2000-ETII - 48 tape heads accommodate 2-inch wide tape rolls, while the optional
HSD

2000-ETII - 75 tape heads accommodate 3-inch wide rolls. See the label on the side
of the HSD

2000-ETII tape head for the loadable tape sizes.
Push the roll of tape onto the mandrel with the adhesive side up (refer to threading diagram
on the HSD

2000-ETII tape head) until the core is set against the mandrel flange. This
ensures the tape will be aligned when feeding into the tape head.