ITEM : C-2170
REVISED DEC 19, 2011
Printed in Vietnam
- 3 -
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have all of the following hardware:
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
1
Short bolt
(M6x40mm)
3
2
Medium bolt
(M6x60mm)
4
3
Long bolt
(M6x80mm)
4
4
Lock Washer
(M6.5x11mm)
11
5
Flat Washer
(M6.5x19mm)
11
6
Allen Key
(4mm)
1
7
Screw
(M4x35mm)
8
STEP 2
STEP 1
Attach seat frame (B) to the back (A) with bolts (1) and (3), washers (5) and (4). Tighten with the Allen
key (6) as shown below.
Note: DO NOT fully tighten any of the bolts, until the chair is assembled, then put on a flat level
surface to make sure the chair is level and then tighten the bolts.