MBA245
MBA246
TWO-UNIT SCOPE HOLDER
FOUR-UNIT
SCOPE HOLDER
Follow directions above
and use the holes shown
at right.
North Washington Street, Wilkes-Barre, PA USA 18705
For Product Information, Call 1-800-433-2232
Pour de plus amples renseignements sur les produits, appeler au 570-825-2741
Para obtener información sobre el producto llame al: 570-825-2741
Information and specifications are subject to change
without notice. Please confirm at time of order
Les données et caractéristiques techniques sont
susceptibles d'être modifiées sans préavis. Veuillez
confirmer au moment de la commande.
Las informaciones y especificaciones están sujetas a
cambios sin previo aviso. Por favor, confirme a la vez
que realiza el pedido.
R
InterMetro Industries Corporation
Visit our Web Site / Visitez notre site Web / Visite nuestro sitio en la Web: www.metro.com
MBA245
MBA246
FOR
MBX
CARTS
mounting brace
mounting brace
1. Pierce holes in the foam
liner inside the scope
holder cabinet: place the
mounting braces against
the cabinet back, align the
(4) mounting holes in the
cabinet and braces, and
pierce the foam liner at the
mounting hole locations
with a sharp object.
2. Attach mounting braces
to the side of the cart with
(4) sheet metal screws as
shown below.
3. Attach the cabinet to the
braces with (4) sheet metal
screws using the holes in
the foam liner as guides.
Note, to reverse the
door, remove the vinyl-
coated wire holder and
the shelf with grommets,
turn the cabinet over and
re-install the holder and
shelf.
CAUTION: TWO (2) PEOPLE
REQUIRED FOR ASSEMBLY.
CAUTION: TWO (2) PEOPLE
REQUIRED FOR ASSEMBLY.