Intermec Trakker Antares 241 Series Скачать руководство пользователя страница 9

16

Where to Go From Here

Now that your new terminal is working, you may need additional information to
use the 241X in your data collection system:

The Trakker Antares 241X Hand-Held Terminal User’s Manual (P/N
069538) and the Trakker Antares 2400 Family System Manual (P/N
071389) contain all the information necessary to configure, operate, and
troubleshoot the 241X.

These TE 2000 terminal emulation guides provide information about how to
configure TE 2000 terminal emulation: the TE 2000 5250 Terminal
Emulation Programmer’s Guide
 (P/N 977-055-004), the TE 2000 3270
Terminal Emulation Programmer’s Guide
 (P/N 977-055-003), and the TE
2000 VT/ANSI Terminal Emulation Programmer’s Guide
 (P/N
977-055-005).

For additional help using dcBrowser, see the documentation that ships with
your DCS 30X, the dcBrowser gateway software, or the Data Collection
Browser Client User’s Guide
 (P/N 070011).

The Intermec Web site at www.intermec.com provides many of our current
manuals in PDF format for you to download.

To order accessories and printed documentation, contact your local Intermec
representative.

Trakker Antares 241X Hand-Held Terminal Quick Start Guide

*069540-003*

*069540-003*

6001 36th Avenue West
Everett, WA  98203
U.S.A.

www.intermec.com

© 2002  Intermec Technologies Corp. 
All Rights Reserved

Содержание Trakker Antares 241 Series










Отзывы: