Chapter 5 — Troubleshooting and Maintaining the SG20T
SG20T Tethered Scanner User’s Guide
37
Maintaining the SG20T
To keep your SG20T in good working order, you may need to upgrade
the SG20T firmware and clean the scanner window.
Upgrading the SG20T
You may need to upgrade the SG20T firmware if there is an update
that incorporates changes to a feature or adds functionality to the
scanner. When you upgrade your scanner the current settings are
erased and replaced with the default settings. The process of
upgrading the SG20T takes about 10 minutes to complete.
To upgrade the SG20T you need:
•
An RS-232 or USB cable. For more information on cables, see
“Required Accessories” on page 6
•
Minimum PC operating system requirements are Microsoft®
Windows® XP with SP2 or Microsoft Windows 2000 with SP4 or
higher versions.
•
EasySet version 5.6.5.1 (see
) or later.
•
The firmware update file (.bin).
To upgrade the SG20T firmware
1
Download the latest SG20T firmware update package from the
Intermec web site at
www.intermec.com
.
a
Go to
Support
>
Downloads
.
b
From the
Product Category
drop-down list, choose
Bar Code
Scanners.
c
From the
Product Family
drop-down list, choose
General
Duty Scanners
.
d
From the
Product
drop-down list, choose your SG20 product
and click
Submit
.
Note:
Before you start the upgrade process, make sure that you are not
using the selected COM port for any other application or you receive
an error and cannot use the COM port.
Содержание SG20T1D
Страница 1: ...SG20T Tethered Scanner User s Guide...
Страница 4: ...iv SG20T Tethered Scanner User s Guide...
Страница 26: ...Chapter 2 Scanning with the SG20T 16 SG20T Tethered Scanner User s Guide...
Страница 61: ......
