Functionality/Feature
ScanPlus 1800
SG20
SCANNING PERFORMANCE (CONT’D)
Barcode symbologies, 2D
N/A
DataMatrix
QR Code
Micro PDF417
Maxicode
Aztec
TLC 39
GS1 Composite
Ability to read multiple barcodes in one
trigger actuation
No
Yes, up to 8
Advanced aiming mechanism
(center decoding)
No
Yes
Double scan prevention
No
Yes
Custom defaults
No
Yes
Ability to be triggered remotely
Yes, via a single character
Yes, via a single character or via an
ISCP command
Triggering modes
Continuous
Level
Flashing
Auto stand
Continuous
Level
Flashing
Auto stand
Pulse
Toggle
Presentation
Data manipulation
Up to 7 scenarios
Possible actions:
•
Move variable amount of characters to
custom position
•
Delete variable amount of characters at
custom position
•
Insert variable amount of characters at
custom position
•
Copy variable amount of characters to
custom position
Up to 7 scenarios
Possible actions are anything the 1800
can do, plus:
•
Advanced Replace/Delete/Insert/Find/
Cursor-Move operations.
•
From either the beginning or the end of data
•
Apply once or multiple times
•
Possible to apply in reverse order
•
Option to insert special Keyboard Wedge
characters
•
Option to insert a Pause between characters
POWER
Power save mode or power down mode
Energy saver mode
Hibernate mode
Battery technology
NiMH, 3.6V / 600mA
Li-ion, 1567mAh
Charging times
3 hours maximum
Fast charge: 3 hours approximately
Slow charge: 6 hours approximately
Battery status indicator
Battery status is provided by charger LED
• Red, blinking = low battery
• Green, solid = end of charge
Battery status is provided by scanner LED
• Green, blinking = charge in progress
(battery < 95%)
• Green, solid = battery is fully charged
• Red, blinking = battery power is low
(< 20% - need to charge)
• Amber, blinking = battery fault
Number of scans on a single battery
charge cycle
10K scans from a fully charged battery
8K scans from 70% capacity
Battery life (number of charge cycles)
Between 500 and 1000 depending on usage Will retain 70% capacity @ 300 cycles
Is battery user-replaceable?
Yes
Yes, by trained personnel only or at an
Intermec Service Center
