Intermec MaxiScan 2300, Руководство пользователя

Страница: 23 / 40

5. Replace the upper part of the flexible stand.
6. Remove the back cover of the scanner by pressing the small hole with a
coin, as depicted in the figure on page 14.
7. Plug the communication cable with the 8 pin modular jack in the appropriate
interface port of the scanner. Refer to the figure on page 15. Plug the other
end of the cable into the appropriate serial communication port of the host
system.
8. Connect the Intermec universal power supply unit to the power supply port.
9. Place the scanner onto the flexible stand as indicated in the figure on page
16 and reposition the back cover of the scanner.
1
Installing the MaxiScan 2300 VS 19
SCANNER FRONT
Leaning backward
Leaning forward
■
To activate Data port 2 (OCIA or KBW interface) scan the following codes
from the Configuration Guide:
1. open the scanner Programming Mode by scanning code 1.1
2. return to factory default settings by scanning code 1.3
IMPORTANT
Pollux manual deel_1 03-11-2000 10:28 Pagina 19