Intermec CV60, Руководство по установке

Страница: 16 / 48

Chapter 1 — Introduction
6 Vehicle Power Supply Installation Guide
Should the fuse fail, diagnose and correct the underlying
problem, and then replace with exactly the same size and type of
fuse.
Output Power Cable
Output power cables are approximately 6.0 feet (1.83 m) to 7.0
feet (2.13 m) long and have a durable 3-pin connector and/or a
2-pin connector to mate with the power supply.
The connector on the far end of the cable is specific to the vehicle
mount computer or docking device in your particular
installation. These rugged connectors have heavy-duty metal
housings and enhanced strain relief to provide added reliability in
the mobile environment.
.
Configuration Chart
Use the following configuration charts as a guide for your power
supply installation.
Order the Smart UPS kit (P/N 203-788-xxx) for the universal
power supply (UPS) that provides backup power during battery
change out.
Do not replace fuse with larger than recommended
fuse values. Use of larger fuse values may result in
damage to equipment.
Note : Ensure that you have the correct output power
cables for the vehicle mount computers being installed
in your location.
Cable and Power Supply Chart
Truck Voltage Power Supply Output Cable Heater
12-60V 851-070-003 VE012-8019-A0 Yes/No
60-90V 851-041-003 VE012-8014-A0 No
(2) 851-041-003 VE012-8017-A0 Yes