Installing Your CK60 Vehicle Dock
1
Install Vehicle Dock and Mounting Kit to your vehicle in a location that is conve-
nient to the operator but does not interfere with vehicle operation or operator
safety. See instructions included with Mounting Kit for details.
2
Connect power cable to the power cable connector on the bottom of the Vehicle
Dock. See instructions included with the applicable Power Cable Kit for detail.
3
Connect data cables if applicable.
•
Five (5) volts DC is provided on the RS232 serial connector to power selected
Intermec tethered scanners.
•
The USB Adapter Cable (p/n: 236-051-001) is required to connect a standard
USB-A male cable to the Intermec special connector.
•
This cable is required only
if
you want to attach a USB device.
Cable Connectors
Installing Your CK60 into the CK60
Vehicle Dock
1
Using your thumb, press the CK60 Handheld Computer release button to lift up
the retaining bar.
2
Line the CK60 Handheld Computer over the docking connector and push your
CK60 down until it is securely seated on the connector.
3
Position your hand in the middle of the Retaining Bar and push down to secure
the CK60 Handheld Computer. Power is provided to your CK60 Handheld Com-
puter only when the retaining bar is secured.
Removing Your CK60 from the CK60 Vehi-
cle Dock
1
Using your thumb, press the CK60 Handheld Computer release button.
2
Lift the CK60 Handheld Computer straight up from the connector.
Vehicle power
Serial connector
USB micro DB9 connector
source connector
CK60 Vehicle Dock Bottom View
Retaining bar must be depressed and engaged to properly secure your
CK60 Handheld Computer before moving your vehicle. Failure to secure
your CK60 Handheld Computer could result in serious injury.
Handheld retaining bar
Press with your thumb
Push down in middle to properly secure CK60 in bay
to release button
Handheld retaining bar
assembly
Release button
CK30 Handheld Computer Quick Start Guide
CK60 Vehicle Dock Installation Instructions
