Intermec 74892, Инструкция по эксплуатации

Страница: 8 / 16

8 USB Bluetooth Adapter Instructions
When the SF51 connects to your host PC, it emits a series of
beeps from low to high, and the blue Intermec Ready-to-
Work indicator turns on and stays on.
8
To disconnect from EasySet, select Communication >
Disconnect .
The SF51 disconnects from EasySet, emits a series of beeps
from high to low, and the blue Intermec Ready-to-Work
indicator starts blinking.
You are now ready to connect to your application. The method
for connecting depends on your data collection application.
To disconnect from your host PC
• Scan this bar code:
Bluetooth Device Disconnect
\60\02\52\05\00\00\06\00\00\00\00\00\00\00\00\00
The SF51 disconnects from your host PC, emits a series of
beeps from high to low, and the blue Intermec Ready-to-
Work indicator turns off.
Connecting From Your PC
The method for connecting from your PC varies depending on
your data collection application. This section describes how to
connect using EasySet.
To connect from your PC using EasySet
1 Start EasySet. Make sure that SF51 is selected as your
product.
2
Select Communication > Connect . The Online Setup dialog
box appears.
3
Select the outgoing COM port that you previously noted and
click
OK .
When the SF51 connects to your host PC, it emits a series of
beeps from low to high, and the blue Intermec Ready-to-
Work indicator turns on and stays on.