Page 18 of 20
Troubleshooting
Problem:
•
I am trying to turn on a module associated to channel 1,
but it will not turn on.
•
My programmed events will not automatically execute.
Solution:
•
Check to be sure there is power supplied to the module.
•
Check to be sure that the lightbulb is not bad.
•
The module might be associated as a ‘FULL OFF’ light-
level. Re-associate the module (see page 9) as a ‘FULL
ON’ or as a dimmed light level.
•
After programming your events, press MODE until the
LCD display indicates ‘AUTO’ or ‘AUTORAND’ mode.
