Interlogix UVP 1.3 MPX HD 18X, Быстрый старт

Страница: 2 / 8

EN 2 UVP 1.3 MPX HD 18X PTZ Camera
Camera description
Figure 1: Overview of the dome camera (pendant-mount shown)
1. Ethernet RJ45 connector.
Connect to the network
devices.
2. Video output.
Connect the BNC
connector to a CCTV
monitor.
3. Power supply cord.
C24 VAC power
supply.
4. Housing.
5. PTZ module.
6. Bubble.
Installing a camera
1. Prepare the mounting surface and install the camera bracket.
2. Unscrew the bubble from the camera and remove the protective
tape from the PTZ module.
3. Press the two tabs on either side of the PTZ module and remove it
from the camera housing. Ensure the module cables still exit from
the cable entry hole in the top of the housing.
Note : If alarm and audio input/output relays are to be used,
connect them to the PCB of the module and route their cables
through the cable entry hole on tom of the housing. See the user
manual for further information on the alarm connections.
4. Install the housing.
Pendant-mount camera :
Attach the camera housing to the bracket using the screws
enclosed with the bracket.
Flush mount camera :
Adjust the height of the two housing tabs by turning the screw on
which they are attached. The distance (h) of the tabs from the
housing ring must be greater than the thickness of the ceiling.