Interlogix TVW-6101, Руководство по установке

Страница: 9 / 24

Installation Guide 7
Note
: When using the HD-TVI output, the HD-TVI
wedge camera should only be connected to a DVR
that supports a TVI signal.
Installation
To install the camera on a surface:
1. Use the camera drill template to mark the
mounting holes.
2. Follow all local safety regulations. Drill through
the mounting surface. If you need to route the
cables from the bottom of the camera, drill a
larger hole in the mounting surface for the
cable harness.
3. Using the Torx wrench, loosen the four screws
to remove the housing cover from the device.