2 / 2
P/N 1073435-EN
• REV
B
• ISS
15MAY18
Drill template
3. Align the
four
holes in the mounting surface
with the screw
holes in the
back box
.
Secure
the
back box
to the
mounting surface using the A screws.
4.
Install the mounting plate to the back box using
the B
screws
.
Place the metal adapter plate on the back box, the
metal tap for the locking screw should be facing up/away
from the back box.
Tighten screw B fully. Otherwise, the
dome will not slide properly into place over the
three
standoffs
, and t
he screw head will block the rotation
.
5. Attach
the safety lanyard to the base of the PTZ camera. It
is important to make sure that the lug, at the end of the
safety lanyard, is contained within the recessed area of
the P
TZ base. Otherwise, it will not allow you to lock the
PTZ to the adapter plate
6.
Hook the other side of the safety lanyard to
the metal tab
in the
back box
.
7.
Route the cables through the cable
access hole.
8.
Align the PTZ camera with the
standoffs on
the
mounting
plate. Rotate the PTZ camera clockwise
on the
mounting
plate to lock the
assembly in place
making sure that the
locking T
orx screw is lined up with the metal tab on the
metal adapter plate.
Torx
screw
Open
Lock
9. Tighten the
Torx
screw with
the T
orx wrench that is
provided with the PTZ
.
Legal and regulatory information
Trademarks and
patents
The
trade names used in this document may be trademarks or
registered trademarks of the manufacturers or vendors of the
respective products.
Manufacturer
Interlogix.
2955 Red Hill Avenue, Costa Mesa, CA 92626 5923, USA
Authorized EU manufacturing
representative:
UTC Fire & Security B.V.
Kelvinstraat 7, 6003 DH Weert, The Netherlands
Certification
Product warnings and
disclaimers
THESE PRODUCTS ARE INTENDED FOR SALE TO AND
INSTALLATION BY QUALIFIED PROFESSIONALS. UTC
FIRE & SECURITY CANNOT PROVIDE ANY ASSURANCE
THAT ANY PERSON OR ENTITY BUYING ITS PRODUCTS,
INCLUDING ANY “AUTHORIZED DEALER” OR
“AUTHORIZED RESELLER”, IS PROPERLY TRAINED OR
EXPERIENCED TO CORRECTLY INSTALL FIR
E AND
SECURITY RELATED PRODUCTS
.
For more information on warranty disclaimers and product
safety information, please check
www.firesecurityproducts.com/policy/product
-
warning/ or scan
the following code:
Contact information
and manuals / tools /
firmware
For contact information and to download the latest manuals,
tools, and firmware, go to the web site of your region.
Americas: www.interlogix.com
EMEA: www.firesecurityproducts.com
Manuals are available in several languages
Australia/New Zealand: www.utcfs.com.au
