Interlogix TVE-1200, Руководство пользователя

Страница: 24 / 50

20 TVE-400/800-1600 H.264 IP Video Encoder User Manual
Note : Up to 8 NAS or IP SAN disk can be connected to the encoder.
6. Set the property of the added network disk.
Select the HDD number. Select its property from the drop-down menu: R/W,
Read-only or Redundancy.
Note : Please refer to the IP SAN/NAS user manual on how to create a file
path in network management.
To configure SNMP protocol settings:
1. Click the Device Configuration > Network Settings > SNMP Settings. The
SNMP Settings window appears.
2. Enter the NIC port value. The default value is 161.
3. When SNMPv1 and/or SNMP v2c are enabled, you can configure the read
SNMP community (default: public), write SNMP community (default: private),
tap address (default: empty) and trap port (default: 162).
4. When SNMPv3 is enabled, you can configure the read user name (default:
public).
Note : SNMPv1, SNMP v2c and SNMPv3 are disabled by default.
5. Select the security level: “no auth, no priv”, “auth, no priv” or “auth, priv”.
6. When the security level is set to “auth, priv”, configure the Authentication
Algorithm and Privacy Algorithm parameters.