Interlogix TVB-5501, Руководство по установке

Страница: 17 / 32

Installation Guide 13
Setting up the camera
Note: If the light source where the camera is installed
experiences rapid, wide-variations in lighting, the camera may
not operate as intended.
To quickly put the camera into operation:
1. Prepare the mounting surface.
2.
Mount the camera on the mounting surface using the
appropriate fasteners. See “ Mounting the bullet camera ”
on page 14.
3. Set up the camera’s network and streaming parameters
so that the camera can be controlled over the network.
For further information, please refer to the “TruVision
Series 5 IP Camera Configuration Manual ”.
4. Program the camera as appropriate for its location. For
further information, please refer to the “TruVision Series 5
IP Camera Configuration Manual ”.
IR illuminators
The camera’s built- in IR illumination provides high -quality
video in low-light environments, even when there is no other
illumination available.
You can configure the IR illumi nation using a web browser or a
client software, such as TruVision Navigator. If the function is
enabled, the IR light is On when the camera enters night
(black and white) mode. If disabled, the IR light is always Off.
The visible IR range may vary due to multiple factor s such as
weather, IR reflection level of objects in frame, lens
adjustment, and camera settings. Please refer to the camera
datasheet for the standard IR range.