Interlogix TVB-5301 Скачать руководство пользователя страница 9

Страница: 9 / 68

Installation Guide

Installation

This section provides information on how to install the

cameras.

Installation environment

When installing your product, consider these factors:
•

Electrical

: Install electrical wiring carefully. It should be

done by qualified service personnel. Always use a proper

PoE switch or a 12 VDC UL listed Class 2 or CE certified

power supply to power the camera. Do not overload the

power cord or adapter.

•

Ventilation

: Ensure that the location planned for the

installation of the camera is well ventilated.

•

Temperature:

Do not operate the camera beyond the

specified temperature, humidity or power source ratings.

The operating temperature of the camera is between -30

to +60°C (-22 to 140°F). Humidity is below 90%.

•

Moisture:

Do not expose the camera to rain or moisture,

or try to operate it in wet areas. Turn the power off

immediately if the camera is wet and ask a qualified

service person for servicing. Moisture can damage the

camera and also create the danger of electric shock.

•

Servicing

: Do not attempt to service this camera

yourself. Any attempt to dismantle this product will

invalidate the warranty and may also result in serious

injury. Refer all servicing to qualified service personnel.

•

Cleaning

: Do not touch the sensor modules with fingers.

If cleaning is necessary, use a clean cloth with some

ethanol and wipe the camera gently. If the camera will not

Содержание TVB-5301





































































Результаты поиска

Содержание TVB-5301

Отзывы:

Interlogix TVB-5301, Руководство по установке, Страница: 9 / 68

Результаты поиска

Содержание TVB-5301

Отзывы: