![background image](http://html1.mh-extra.com/html/interlogix/truvision-series/truvision-series_installation-manual_2077077011.webp)
Alarm input and output connections
The alarm output can be used to turn on and off an external
alarm device. Connect a 30 VDC/1A external power supply to
the alarm output. If using an AC power supply, an external
relay must be used to prevent electric shock and damage to
the device. See Figure 2 below.
Figure 2: External alarm output
SD memory card installation
To install the SD memory card in the PTZ dome
1.
Loosen the
six hex screws on the bubble assembly.
Note:
Do not remove the hex screws from the bubble
assembly. Loosen t
hem enough to remove the bubble.
2. Carefully pull down the bubble assembly (2) to separate it
from the top enclosure (1), and remove the thin foam
shipping ring (3), and tape (4).
Installation Guide
11
Содержание TruVision Series
Страница 1: ...TruVision Stainless Steel PTZ Camera Installation Guide P N 1073420 EN REV A ISS 30JAN18...
Страница 2: ......