Wiring
We recommend that different power supplies are used for the module and
heating.
Note:
When using guillotine connectors, put the wire in the connector, and then
pull it out slightly so that it tightens.
Figure 5: Terminals and controls
Item Description Note
(1) Top
cell
(2) Bottom
cell
(3)
DIP switches
Channel selection (1 and 2)
Operating mode selection (3 to 5)
(4) Delay
adjustment
An adjustment of the response time of the intrusion alarm (50 to
800 ms)
(5)
Selection button
Select alignment mode
Select cells in alignment mode
(6)
Alarm LED
Intrusion alarm / disqualification (blinking)
Level of the signal in alignment
Table 1: Terminals
Terminal Description
1 “+”
Power
2 “
−
” Power
3 “+”
Heating
6
SB Series AIR Beam Detectors Installation Manual
