Main Menu
Tap Menu to access additional feature’s for
controlling / customising the NetworX
security system.
**This feature needs to be enabled by your
security provider**
User Menu
Tap
Menu
>
Control
>
Users
> Select user to modify > follow prompts
A user is a person that has been allocated a PIN code to arm and disarm partitions within
the security system. A standard user has the ability to change their pin code, whilst a master
user has the ability to create, delete and modify all.
Change Name
– Type name of user
Change Code
– Select new user pin code
– User authority level and partition control (only if required)
Delete User
– Remove user pin from system
Settings Menu
Tap
Menu
>
Settings
to access the following
features located within the settings menu.
Controls Menu
Tap
Menu
>
Controls
to access the following
features located within the control menu.
Zones
(Bypassing)
Tap
Menu > Control > Zones Select > Zone >
Bypass
User -
Examples
Quick guide -
Examples
Selected zones (sensors) within the security
system can be bypassed (isolated) manually. A
bypassed zone is not capable of activating an
alarm, as it is temporarily removed from your
system. All bypassed zones are reset and cleared
from memory when the security system is next
armed / disarmed.
Modify user pin code (e.g.: user 1)
Menu > Control > Users > (Master pin code)
Select user 1
Change Code
> Type new pin code > Enter
Home to exit
Create new user (e.g.: user 2)
Menu > Control > Users > (Master pin code)
Select user 2
Create Code
> Type new pin code > Enter
Change Name
> Type new user name > Enter
Home to exit
Delete user (e.g.: user 2)
Menu > Control > Users > (Master pin code)
Select user 2
Delete User
Home to exit
Set system time and date.
Zone / sensor control. Bypass, add to
chime group
Show system status
Display system history
Display installer
contact details
Clean touch panel
System testing
Smoke detector reset
Zone, partition, user,
output naming and
message centre
Adjust system entry and exit times.
Arm / Disarm single or multiple partitions
within the security system
SMS and alarm phone numbers.
(Additional equipment required for SMS)
Control up to 16 separate outputs
Text input for zones, partitions, users,
outputs and messages.
Add, create or delete user pin codes
Speaker volume
Add, create or delete access cards
Adjust display touch and brightness.
?
Zone Name
Master User
No Name
1.
2.
3.
Add User
No Name
Add User
No Name
Home to exit
Partition is ready to arm
Partition Ready
Partitions
Partitions
Partitions
Partitions
