NX-1815E NetworX Voice Keypad with 16 zone LEDs User Manual
11
Understanding the Main Menu
Pressing the [MENU] key access the NX-1815E
s main menu, here you will find
the 10 main features used for customisation and setup of your security system.
From the moment you press the menu key, the NX-1815E
s personal voice guide
(PVG) will guide you through your chosen selection.
[Menu] [1]
Zone bypass
[2]
Zone chime
[3]
Event history
[4]
System test
[5]
User configuration
[6]
Phone number configuration
[7]
Output control
[8]
Voice message recording
[9]
Basic system configuration
[0]
Advanced system configuration
Controlling Zone Bypasses
Menu 1
The zone bypass menu is used to bypass (isolate) selected zones in your
security system. A bypassed zone is not capable of activating an alarm, as it is
temporarily disabled from your system. This option is commonly used to bypass
zones that require service, or zones that you wish to temporarily add to your
stay mode
. Whilst still offering security on the remaining zones, bypassing
zones lowers your level of security and caution should be exercised. All
bypassed zones are reset and cleared from memory when your security system
is next armed / disarmed. Your security system must be disarmed (turned off)
before being able to bypass zones. After bypassing your selected zones, your
security system must be armed (turned on in either the away or stay mode to
secure the remaining zones.
Note:
Press status to check bypassed zones, or simply arm your security system
and all bypassed zones will be announced automatically.
How to: Bypass a single zone
Step Example:
How to bypass zone 5
1.
[MENU] -
[
1
]
Selects main menu - Option 1, To control zone bypass.
2.
[
5
] -
[ENTER]
Selects zone 5.
3.
[0]
Toggles zone 5 from un-bypassed to bypassed state (or if already
bypassed, from bypassed to un-bypassed.)
4.
[MENU]
Exits back to main menu.
www.msealarms.com.au
