10
NX-181xx NetworX Voice keypad with touch buttons User Manual
Red flashing
Partition in alarm
Red rapid
flashing
Indicates connected room station when intercom function is active.
Yellow
Partition armed in the stay mode
Off
Partition not ready, zone / zones are not secure
Away Arming
Away arming is used when you are leaving and you want the premises protected
in your absence. If your service provider has enabled the “forced arming” feature,
you will be able to arm your security system with pre-programmed zones not
secure. Ideal for systems that have entry / exit doors fitted with door contacts,
allowing you to arm your system with the door opened, and protecting the door
after its closed. Your NX-181xx will announce all zones that are not secure when
armed. You may arm your system by entering your 4 or 6 digit user pin code, or if
your service provider has enabled the quick arm feature, you can simply touch
the Away key.
Step
How to:
Arm your system in the
“Away Mode”
1.
Close all protected doors and windows, ensure everyone has left the premises.
Ensure the status light is lit green.
2.
Touch [Away].
OR
[?]-[?]-
[?]-[?]
Enter your 4 or 6 digit user pin code.
3.
Vacate the premises immediately.
Stay Arming
Stay arming is used when you are staying in the premises and wish to arm
certain zones and bypass others IE: Arming the perimeter of the premises, whilst
automatically bypassing all the internal motion sensors. If an armed zone is
alarmed whilst your security system is in the stay mode, it will initiate a warning
tone at your NX-181xx, your sirens will sound at the end of this warning. Your
service provider predetermines this warning time at the time of installation.
Step How to:
Arm your s
ystem in the “Stay Mode”
1.
Close all protected doors and windows. If motion
sensors are included in your “stay mode”
have everyone move out of those partitions.
Ensure the status light is lit green.
