background image

NS3562-8P-2S Industrial Wall-mount Managed Gigabit Ethernet Switch Quick Installation Guide 

configuration sequence becomes the startup 
configuration file, which is called configuration save. 

To save all applied changes and set the current 
configuration as a startup configuration, the startup-
configuration file will be loaded automatically across a 
system reboot. 

1.  Click ”

Save > Save Configurations to FLASH

” to 

login “Configuration Manager” Page. 

 

2.  Press the “

Apply

” button to save running 

configuration to start up configuration. 

 

7. Recovering Back to Default 
Configuration 

IP Address has been changed or admin password 
has been forgotten 

To reset the IP address to the default IP address

 

“192.168.0.100”

 or reset the login password to default 

value, press the 

reset button

 on the front panel for 

about 

5 seconds.

 After the device is rebooted, you can 

login the Web interface management within the same 
subnet of 192.168.0.xx.  

Figure 9: NS3562-8P-2S Reset Button 

 

8. Customer Support  

Thank you for purchasing IFS products. You can browse 
our online FAQ resource and User’s Manual on IFS Web 
site first to check if it could solve your issue. If you need 
more support information, please contact IFS switch 
support team.  

Look under transmission products. 

IFS online FAQ: 

http://www.Interlogix.com/support 

Switch support team mail address: 

http://www.Interlogix.com/support 

Copyright 

© 2016 United Technologies Corporation.  

Interlogix is part of UTC Climate, Controls & Security, a 
unit of United Technologies Corporation.  All rights 
reserved. 

Trademarks and patents 

T

rade names used in this document may be trademarks 

or registered trademarks of the manufacturers or 
vendors of the respective products. 

Содержание NS3562-8P-2S

Страница 1: ...If any item is found missing or damaged please contact your local reseller for replacement 2 Requirements Workstations running Windows XP 2003 Vista 7 8 2008 10 MAC OS X or later Linux UNIX or other platforms are compatible with TCP IP protocols Workstations are installed with Ethernet NIC Network Interface Card Ethernet Port Connection Network cables Use standard network UTP cables with RJ45 conn...

Страница 2: ... with 8 mm diameter on the wall the distance between the 2 holes is 133 mm and the line through them must be horizontal Step 2 Install a conductor pipe inside the board hole and flush the edge of the conductor pipe with the wall surface Step 3 Screw the bolts into the conductor pipe The Wall mount Managed Switch is between bolts and conductor pipe as shown below Figure 3 Wall Mount install 4 3 DIN...

Страница 3: ...please enter admin in both the default user name and password fields The login screen in Figure 6 appears Default Username admin Default Password admin Figure 6 Web Login Screen 3 After entering the password the main screen as shown in Figure 7 Note The following web screen is based on the WGS 4215 8T2S The display of the WGS 4215 8T2S is the same as those of the WGS 804HPT and WGS 4215 8T WGS 421...

Страница 4: ...lt value press the reset button on the front panel for about 5 seconds After the device is rebooted you can login the Web interface management within the same subnet of 192 168 0 xx Figure 9 NS3562 8P 2S Reset Button 8 Customer Support Thank you for purchasing IFS products You can browse our online FAQ resource and User s Manual on IFS Web site first to check if it could solve your issue If you ne...

Отзывы: