![background image](http://html.mh-extra.com/html/interlogix/ns2052-8p-2c/ns2052-8p-2c_user-manual_2077340020.webp)
Chapter 3: Installation
Before connecting to other network devices:
1. Make sure both sides of the SFP transceiver are with the same media type. For
example, 1000BASE-SX to 1000BASE-SX, 1000BASE-
LX to 1000BASE
-
LX.
2. Check if the fiber-optic cable type matches the SFP transceiver requirement.
•
To connect to 1000BASE-SX SFP transceiver, use the multi-mode fiber cable
with one side being male duplex LC connector type.
•
To connect to 1000BASE-
LX SFP transceiver, use the
single-mode fiber cable
with one side being male duplex LC connector type.
To connect the fiber cable:
1.
Attach the duplex LC connector on the network cable to the SFP
/SFP+ transceiver.
2. Connect the other end of the cable to a device with the SFP/SFP+ transceiver
installed.
3.
Check the LNK/ACT LED of the SFP
/SFP+ slot on the front of the industrial PoE+
switch. Ensure that the SFP/SFP+ transceiver is operating correctly.
4
. Check the link mode of the SFP port if the link fails.
Note:
We recommend the use of Interlogix SFPs on the
industrial PoE+switch. If you
insert an SFP transceiver that is not supported, the industrial PoE+switch will not
recognize it.
To remove the transceiver module:
1. Make sure there is no network activity by checking with the network administrator.
Or
, through the management interface of the switch/converter (if available), disable
the port in advance.
16
NS2052-8P-2C Industrial PoE+ Switch User Manual
Содержание NS2052-8P-2C
Страница 1: ...NS2052 8P 2C Industrial PoE Switch User Manual P N 1073392 EN REV A ISS 07FEB18 ...
Страница 4: ......