Interlogix IFS WMC303-1W-1T-1200 Скачать руководство пользователя страница 109

Страница: 109 / 129

-95-

Weekday

Check one or more days to let the device auto reboot on schedule.

When choosing “Every day” as your reboot plan, the “Weekday” will be

grayed out (disabled), which means Every day will auto reboot at the time

that you scheduled.

This setting will only take effect when the Internet connection is accessible and the GMT

time is configured correctly.

You must select at least one day when choosing “

Weekday

” as your reboot plan.

When choosing “

Every day

” as your reboot plan, the “

Weekday

” will be grayed out

(disabled), which means

Every day

will auto reboot at the time that you schedule.



Example of how to configure

Schedule Reboot

. Please take the following steps:

Before configured schedule reboots, please ensure the Internet connection is accessible and the GMT time is

configured correctly according to

NTP Settings

page.

Step 1.

Select the Schedule Reboot Setting checkbox.

Step 2.

Enter the Reboot Time (24-hour format) to enable this function to take effect. For example, if you want

this function to work at 23:00 every Sunday, choose "Weekday" in the Reboot Plan field.

Figure 5-84

Schedule Reboot - Example

Step 3.

Click the “Apply Changes” button to take this function effect.

Содержание IFS WMC303-1W-1T-1200


































































































































Результаты поиска

Содержание IFS WMC303-1W-1T-1200

Отзывы:

Interlogix IFS WMC303-1W-1T-1200, Руководство пользователя, Страница: 109 / 129

Результаты поиска

Содержание IFS WMC303-1W-1T-1200

Отзывы: