background image

Copyright

 

© 2011 UTC Fire & Security. All rights reserved. 

Trademarks and 

patents

 

Interlogix, IFS SFP Tranceivers Brand and logo are trademarks of 
UTC Fire & Security. 

Other trade names used in this document may be trademarks or registered 
trademarks of the manufacturers or vendors of the respective products. 

Manufacturer

 

UTC Fire & Security Americas Corporation, Inc. 
2955 Red Hill Avenue, Costa Mesa, CA 92626-5923, USA 

Authorized EU manufacturing representative: 
UTC Fire & Security B.V. 
Kelvinstraat 7, 6003 DH Weert, Netherlands 

Version

 

This document applies to IFS SFP Tranceivers version 00.20. 

Certification

N4131

FCC compliance

Class B:

 This equipment has been tested and found to comply with the limits 

for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits 
are designed to provide reasonable protection against harmful interference in a 
residential installation. This equipment generates, uses, and can radiate radio 
frequency energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications. 

There is no guarantee that interference will not occur in a particular installation. 
If this equipment does cause harmful interference to radio or television 
reception, which can be determined by turning the equipment off and on, the 
user is encouraged to try to correct the interference by one or more of the 
following measures: 

• 

Reorient or relocate the receiving antenna. 

• 

Increase the separation between the equipment and receiver. 

• 

Connect the equipment into an outlet on a circuit different from that to 
which the receiver is connected. 

• 

Consult the dealer or an experienced radio/TV technician for help. 

European Union 

directives

2004/108/EC (EMC directive)

: Hereby, UTC Fire & Security declares that this 

device is in compliance with the essential requirements and other relevant 
provisions of Directive 2004/108/EC 

2002/96/EC (WEEE directive): 

Products marked with this symbol cannot be 

disposed of as unsorted municipal waste in the European Union. For proper 
recycling, return this product to your local supplier upon the purchase of 
equivalent new equipment, or dispose of it at designated collection points. For 
more information see: www.recyclethis.info.

Contact information 

www.utcfireandsecurity.com or www.interlogix.com

Customer support

www.interlogix.com/customer-support

Содержание IFS SFP S20-1SLC/A-20















Отзывы: