![Interlogix IFS POE302-SP Скачать руководство пользователя страница 10](http://html1.mh-extra.com/html/interlogix/ifs-poe302-sp/ifs-poe302-sp_user-manual_2077034010.webp)
4 IFS POE302-SP Ethernet Splitter User Manual
Before Installation
The POE302-SP separates data and power and provides two
DC power output options via a DIP switch.The two power
options are shown below.
• 12VDC/2A
• 24VDC/1A
Figure 2: Voltage output
The default switch setting is 12V.
Note:
Please check the power requirements of the device that
will be receiving its power from the POE302-SP. If the power
requirements (voltage and current) exceed the power output
that the POE302-SP can supply, a built-in current overload
circuit will shutdown the POE302-SP to protect it from
damage. Power will then not be supplied to the connected
device.
PoE Injector and Splitter Installation
The POE302-MS (PSE) and the POE302-SP (PD) can be
installed in pairs. However, use of third-party devices is
allowed only if the device complies with the IEEE 802.3at
Power over Ethernet standard.
1. Connect a standard network cable from "EDC" port
of POE302-MS to "PoE In" port of POE302-SP. The POE
LED of POE302-SP / POE302-MS will be constantly on.
Содержание IFS POE302-SP
Страница 1: ...IFS POE302 SP Ethernet Splitter User Manual P N 1076527 REV A ISS 08FEB12...
Страница 4: ......
Страница 6: ......