IFS MCR200-1T-1TW User Guide 9
■
10/100Base-TX Port
LED
Color
Function
Light
Indicate that the port is link up.
Blink
Indicate that the Converter is actively
sending or receiving data over that port.
LNK/ACT
Green
Off
Indicate that the port is
link down.
The Rear Panel
The rear panel of the Ethernet over VDSL2 Converter is shown as below.
Figure 2:
MCR200=1T-1TW
rear panel
MODE DIP Switch
The Ethernet over VDSL2 Converter provides 4 selective transmission
modes. By switching the transmission modes, you can obtain a best
transmission mode to suit with phone line quality or distance of
connectivity. The following is the summary table of transmission setting,
bandwidth and distance extensibility tested for AWG 24 (0.5mm) twisted-
pair without noise and cross talk.
