- 23 -
K3 FAQ for CD player
Problems
Possible causes
Remedies
The light doesn’t
work
The fuse is broken
Change the fuse on back of CD
Disc can’t be put in
or taken out
CD disc is in the CD
Take out the CD and put in
Turn over the CD to another
side
CD with print design side face
up
Magnetic head is dirty or the
CD has some flaws
Clean the magnetic head or put
in a new CD
Temperature is too high
Renew the temperature to
normal level
Condensation
Stop the sauna for one hour and
try again
No sound
Volume of sound in the
lowest point
Adjust the volume as required
The cord is not joined well
Join it well
CD can be put in or
taken out, but no
voice
The rear plug is not joined
tightly
Plug it tightly
Sound only comes
from one speaker
Check to see if the sound
balance is set to one side
Move the balance
The control push-
button is not
available
Too noisy, the
microprocessors
can’t work normally
The control panel is not fixed
well
The sound is
jumping
The angle of installation
beyond 30 degrees
Fix again till the suitable
position
Magnetic head is dirty or the
CD has some flaws
Clean the magnetic head or put
in a new CD
The radio doesn’t
work and can’t auto
select wave band
The wire is not connected
well
Connect the wire well
The signal is too weak
Select the wave band by
yourself