8
MGA Powerdesk includes support for Intergraph Computer Systems monitors. Take the
following steps to select the appropriate Intergraph monitor type:
1. Right-click the desktop and go to Properties/Settings/Advanced/MGA Monitor. The
MGA Monitor tab displays a monitor icon.
2. Select the appropriate Intergraph monitor from the list displayed.
Using Software for Zip or Jaz Drives (Windows 98)
If you purchased an Iomega Jaz or Zip drive with your system, the software included with the
drive options may not function properly in Windows 98. Iomega will release software that is
fully compatible with Windows 98 in August 1998. You will be able to get this software from
Iomega’s Web pages at http://www.iomega.com.
Reinstalling USB Support (Windows 95)
If you reinstall Windows 95 on the system, and you want to use the system’s Universal Serial
Bus (USB) ports, you must reinstall USB support software from the Windows 95
CD-ROM. See the
USB
.
TXT
file on the Windows 95 CD-ROM for instructions.
Reinstalling the Ensoniq AudioPCI Driver
Software (Windows 98)
If you reinstall Windows 98 on a system with an Ensoniq AudioPCI sound card, the card is
detected during Setup and listed as an “unknown device” because there is no driver for it in
Windows 98. To reinstall the Ensoniq driver, run the
SETUP
.
EXE
file found on the Ensoniq
software CD-ROM. This causes the Add New Hardware Wizard to run; when prompted,
select to display the list of drivers, and select Ensoniq AudioPCI from that list. When the Add
New Hardware Wizard completes, the Ensoniq Install Wizard continues; follow the
instructions displayed to complete the installation.
After the Ensoniq driver software has been installed, you must manually install the MS-DOS
support files. To do this, run the
INITAP
.
BAT
file found in the
EAPCI
directory on your system.