Intergraph InterSite, Быстрый старт, Страница: 36 / 46

26
3. Key in the username and password. By default, the username is root and the password
is calvin.
Determining a Server’s Status
When a list of servers display under the Windows NT group in the Tree pane, an icon
depicting a server displays next to each server name. The icon shows if the Server Manager
Console was able to contact the server and determine its status. The following table
describes the icons and their meanings:
Icon Meaning
A server Server Monitor Console contacted the server.
The server is running and has no reported
problems.
Server with the letter “i” in a blue circle Server Monitor Console contacted the server.
The server is running, but had at least one
informational event recorded.
Server with an exclamation point in a
yellow triangle Server Monitor Console contacted the server.
The server is running, but had at least one
warning event recorded.
Server with an exclamation point in a
red circle Server Monitor Console contacted the server.
The server is up, but had at least one critical
event recorded.
Server with a question mark in a blue
circle Server Monitor Console contacted the server.
The server is running, but Server Manager
Console could not determine the health of the
server. If you see this icon, close the Server
Manager Console and start it again.
Server with a red X beside it Server Monitor Console was not able to
determine any information about the server. The
server may be powered off or in the process of
restarting.
To display information about a server:
1. In the Tree pane of the Server Manager Console, select the Windows NT group.
Information about all of the servers displays in the List pane. The List pane displays
each server’s name, the server’s status, the server’s operating system, the version of
LANDesk Server Manager running on the server, and whether or not the server has an
installed EMC.