Intergraph InterServe 75, Руководство для начинающих

Страница: 13 / 20

5
The Windows NT delivery media contains software and drivers for both Reduced Instruction
Set Computing (RISC)- and Intel-based systems. When installing Windows NT distribution
files, make sure to install them from the \
I
386 directory (the Intel software directory) on the
delivery media.
Starting Operating System Setup
The first time you start the system, it boots to a Microsoft End-User License Agreement
(EULA) screen. After reading and accepting the terms of the agreement, follow the
instructions to continue operating system Setup. Take the default settings provided by Setup,
except as noted in the following text. You can set up a user account and join a workgroup or
domain after you configure the video display, the sound processor, and networking.
CAUTION
If you purchased a system with Windows NT Small Business Server, read Microsoft’s
Start
Here
document before continuing. Setup procedures for Windows NT Small Business Server
differ from Setup procedures for Windows NT Server.
NOTE Before starting the system for the first time, you may want to learn more about system power,
startup, and shutdown. See the
System Guide for more information.
To start the computer and set up the operating system software:
1. Turn on the monitor by pressing its power switch.
2. Turn on the system by pressing its power switch. The system starts and the EULA screen
displays.
3. Read the terms of the EULA and then follow the instructions displayed on-screen to
complete the Setup process. A Welcome screen displays, then a prompt for user and
organization, and then a prompt for the product ID. Accept the default settings provided
by Setup, except as follows:
−
On a system with a 3Com network adapter, the network adapter driver software is not
preinstalled. When prompted to install a network adapter, choose Select from list.
From the displayed list, choose 3Com Fast Etherlink XL Adapter (3C905). Allow
Setup to install this driver software.
NOTE
On a system with Windows NT Small Business Server, networking is installed by default and
without user intervention. After Setup completes, go to Network in the Control Panel to set the
system’s network address. See Microsoft’s
Start Here document.
−
Create an Emergency Repair Disk when prompted.
NOTE
On a system with Windows NT Small Business Server, you will create an Emergency Repair
Disk after completing Setup.
−
Enter a password for the Administrator account when prompted.