Intergraph InterServe 3x5, Дополнительное руководство, Страница: 5 / 6

3
Number of
Controllers PCI
Slot Controller
Order Power
Console BIOS
Configuration
4 1 1st 0 3
2 2nd 1 2
3 3rd 2 1
4 4th 3 0
Windows NT 4.0
Installing the Adaptec SCSI Controller Driver
If you have to reinstall Windows NT 4.0 on one of the following systems, be sure to reinstall the driver
for the SCSI controller (2940
SCSIDRV
) from backup diskette during Setup.
u
InterServe 615UW, 625UW
u
InterServe Web 605UW, 615UW
u
InterServe Firewall 305UW, 605UW
To install the 2940
SCSIDRV
driver during Setup:
1. When prompted, press
S
to bypass detection of mass storage devices.
2. When prompted, press
S
to specify a mass storage device other than those listed.
3. When prompted, select Other from the list of devices presented.
4. Follow the prompts to install the driver from the 2940
SCSIDRV
backup diskette. When presented
with a list of Adaptec SCSI controllers, select the entry for Windows NT 4.0.
Installing QFE Software
Intergraph’s Quick-Fix Engineering (QFE) update software contains fixes for operating system
problems or limitations. If a system requires Quick-Fix Engineering (QFE) update software, it is
installed on the system before it leaves the factory. If QFE update software is installed on the system,
you can (and should) create a QFE backup diskette using InterSite Version Manager.
If you reinstall Windows NT 4.0 and the Windows NT 4.0 Service Pack 3 software, be sure to reinstall
the QFE update software as well. Install the QFE update software after you reinstall Service Pack 3
software. QFE update software contains post-Service Pack 3 fixes.