Intergraph Intense3D Wildcat 4105, Руководство пользователя по оборудованию

Страница: 15 / 22

7
Finishing the Installation
To finish the installation:
1. Close the workstation.
2. Connect the workstation’s monitor as described in Chapter 1.
Installing Driver Software
You can install the Intense3D Wildcat video display driver software from the backup media
delivered with the system. You can also get updated driver software from Intergraph Computer
Systems’ Web pages; see the Preface of this document for more information. Refer to the
Microsoft Windows NT documentation and online Help for more information on installing drivers
and software application programs, and on configuring your workstation’s video display.
Make sure your workstation has the following before attempting to install Wildcat driver software:
♦
Microsoft Windows NT Workstation 4.0 operating system
♦
3 MB of free space on the computer’s primary system disk
CAUTION Make sure you have the correct driver to use with the Windows NT 4.0 operating
system. If you are unsure, refer to the
README
.
TXT
file located on the delivery media
for this information.
To install Intense3D Wildcat 3510 driver software:
1. Log on to Windows NT using an account that has administrative privileges.
2. Create a directory on the workstation’s primary system disk.
3. Copy the files from the backup media to the directory created in step 2, or download them to
that directory from Intergraph Computer Systems’ Web pages.
4. From the operating system Start menu, go to Settings/Control Panel/Display/Settings.
5. Click Display Type, and then click Change.
6. In the Change Display dialog, click Have Disk.
7. In the Install From Disk dialog, type the path to the directory that you created in step 2 and
click OK.
8. Verify that the Wildcat 3510 driver is highlighted in the Change Display dialog and click OK.