Intercoax IXTS-160D, Руководство пользователя

Страница: 16 / 63

Software Use — 15
ENG
6.4. Algorithm Configuration
[ Algorithm configuration ]
•
Basic parameters : infrared and visible light resolution.
•
Crop : visible light clipping is used to match the visible light picture with the infrared full picture
for face detection. The visible light of each dual-light device needs to be cropped before use.
•
Face Detect : if the face cannot be detected, the “minimum face” parameter can be modified
according to the actual situation.
•
Alarm parameters : used to set the alarm type and alarm temperature, you can choose
whether to save the data. When the first alarm is triggered, hold for 3 seconds. After the
alarm is lifted, the second alarm can be triggered
•
Surface to Body : the thermal camera screens the body surface temperature, which is used
to convert the body surface temperature to the body temperature. The parameters are
recommended to remain the default.
Note: when season changes, environmental temperature changes, blackbody error changes
and other problems occur, the difference between body surface and body temperature will
change. For example, the human body surface temperature is high in summer, low in winter,
and low in blackbody reference source will lead to high temperature reading.
When the human body temperature value appears to deviate, it is necessary to adjust the
body surface & body temperature difference value parameter.
The adjustment methods are as follows:
1) It is suggested to use software to test the body surface temperature of multiple persons,
such as 4~8 people, take the average body surface temperature, and then calculate the
adjustment value according to the real body temperature. The parameter adjustment range
is between 0.5 ℃ and 2.5℃. If the calculated difference exceeds the value, please contact the
relevant technician.