16 Ga. Wide Crown Staplers
Drives Wide Crown Staples (5/8" to 2" / 16 to 50mm)
Model No. SGSW5016 Item No. 64415
Model No. SBCS5016 Item No. 64419
15
Interchange Brands
Operator’s Manual
OpERATING THE TOOL
Read the section titled SAFETY.
NOtE:
The information contained in this Manual is designed to assist you in the safe maintenance
of the stapler . Some illustrations in this Manual may show details or attachments that are different
from those on your stapler .
WARNING:
Disconnect air hose and remove staples from stapler when:
Clearing a jam
Doing maintenance and inspection
maintenance
and Inspection
Clearing a jam
Remove a jammed staple in the following order:
1 . DISCONNECT AIR HOSE .
2 . Remove all staples .
3 . Remove the lock lever and open blade guide .
4 . Remove the jammed staple with a slotted head
screwdriver .
5 . Close blade guide and latch .
6 . In case of frequent jams, contact an authorized
service center .
A qualified person should perform
repairs and maintenance.
periodic maintenance to be performed:
Drain air line filter daily .
Keep lubricator filled .
Clean filter element, then blow air through filter in direction opposite to normal flow .
Clean magazine and feeder mechanism .
Keep safety/push lever working properly .
Lubricate the stapler after stapling .
Drain air compressor .
All quality staplers will eventually require servicing or replacement of parts because of wear
from normal use .
Storing
When not in use for an extended period, apply a thin coat of the lubricant to the steel parts
to avoid rust .
The stapler should be stored in a warm and dry place when not in use . Do not store the
stapler in a cold weather environment .
