interactive scape Scape X sx65-006, Руководство по эксплуатации, Страница: 4 / 27

1. General
—
Scape
X® Technical specifications are
sx65-006 to change without notice.
Operating manual Version 1.7 – Status: 04/2020
Page 4 of 27 poc: SFi
1. General
This manual describes the safe installation, configuration and correct operation of the
Scape X® .
If necessary, pay attention to the supplementary documents, such as the installation instructions.
1.1. Safety instructions
Before using and operating your Scape X® , observe the following safety instructions to prevent yourself, your
environment and the Scape X® from being damaged.
Fire and electric shock
Overloaded sockets, extension cords and power strips can cause fire and electric shock.
· Avoid using power strips and extension cords if possible.
· Do not chain multiple extension cords or power strips together.
Overheating
Heat build-up can overheat the screen. This can damage the device.
· Ensure there is sufficient air circulation around the Scape X® .
· Make sure all the ventilation holes on around the screen are uncovered.
Excess voltage from lightning strikes
In the event of a thunderstorm there is a risk of excess voltage damage from lightning strikes electrical appliances that
are plugged in.
· Do not install the Scape X® during a thunderstorm.
· Disconnect the devices from the mains during thunderstorms.
Moisture, liquid and steam
Moisture, liquids and
steam inside the Scape X® can cause electric shocks or short circuits.
· Only use the Scape X® indoors.
· Do not allow liquids to get inside the Scape X® .
· Protect your Scape X® from steam and moisture.