interactive scape Scape Tangible st65-004, Руководство по эксплуатации

Страница: 9 / 26

3. Installation
—
Scape®
Tangible Technical specifications are
st65-004 to change without notice.
Operating manual Version 1.6 – Status: 12/2019
Page 9 of 26 poc: SFi
3. Installation
The
Scape® Tangible
is approved for upright or hanging operation as well as for horizontal operation.
When the screen is suspended, secure the screen against falling using the metal eyelets mounted on the upper side if
possible.
If necessary, you can unscrew the metal eyelets and insert the supplied screw covers.
The
Scape® Tangible may only be operated at a tilt angle of 0 - 90°.
Scape® Tangible 65:
For horizontal mounting (0 ° tilt angle) the screen must be
supported at least at its 4 corners. Ideally, the frame is supported
along its entire circumference.
The
Scape® Tangible comes with VESA compatible threaded holes. The monitor can be mounted in a landscape format
by using these holes.
For mounting with VESA brackets, use a suitable wall bracket with a load equivalent to the weight of the monitor. To
attach the VESA mount you must use 4 M8x25 metal screws.
VESA formats:
MIS-F 400 x 400 mm (M8)
MIS-F 600 x 400 mm (M8)
MIS-F 800 x 400 mm (M8)