interactive scape Scape Movable 65 pcsi-005, Руководство по эксплуатации

Страница: 5 / 33

1. General
—
Scape®
Movable Technical specifications are subject
smo65-005 to change without notice.
Operating Manual Version 1.6 – Status: 12/2019
Page 5 of 33 poc: SFi
1. General
This manual describes the safe installation, configuration and correct operation of the
Scape® Movable
.
If your device does not have an integrated PC, you can skip the chapters and notes about the integrated PC. All other
notes and instructions continue to apply without restriction.
If necessary, pay attention to the supplementary documents, such as the installation instructions.
1.1. Safety instructions
Before using and operating your Scape® Movable , observe the following safety instructions to prevent you, your
environment or the Scape® Movable from being damaged.
Fire and electric shock
Overloaded sockets, extension cords and power strips can cause fire and electric shock.
· Avoid using power strips and extension cords if possible.
· Do not chain multiple extension cords or power strips together.
Overheating
Heat build-up can overheat the screen and the integrated PC. This can damage the device.
· Ensure there is sufficient air circulation around the Scape® Movable .
· Make sure all the ventilation holes on around the screen and integrated PC are uncovered.
Excess voltage from lightning strikes
In the event of a thunderstorm there is a risk of excess voltage damage from lightning strikes electrical appliances that
are plugged in.
· Do not install the Scape® Movable during a thunderstorm.
· Disconnect the devices from the mains during thunderstorms.
Moisture, liquid and steam
Moisture, liquid and steam inside the
Scape® Movable can cause electric shocks or short circuits.
· Only use the Scape® Movable indoors.
· Do not allow liquids to get inside the Scape® Movable .
· Protect your Scape® Movable from steam and moisture.