Interactive Intelligence PureCloud Edge, Руководство администратора

Страница: 5 / 33

PureCloud Edge Setup Administrator's Guide 5
Safety information and warnings
This section contains safety information for ensuring that personal physical injury, damage to hardware, and
data loss do not occur with your PureCloud Edge appliance.
Data center rack and mounting safety
Consideration Description
Elevated operating ambient
temperature Ensure that the environment is temperature controlled so that
PureCloud Edge stays below its maximum ambient
temperature threshold.
Reduced airflow Ensure that the rack or enclosure has proper ventilation so
that PureCloud Edge stays below its maximum ambient
temperature threshold.
Mechanical overloading Ensure that all components pertaining to and connected to the
rack or enclosure are properly mounted, supported, and
secured.
Circuit overloading Ensure that any electricity source supplied through the rack or
enclosure is not overloaded.
Reliable earthing Ensure that the rack or enclosure provides reliable earthing
(grounding) for any equipment installed within it to reduce the
risk of electric shock from leaking current (fault current).
Electrical and general safety guidelines
q
Danger!
Read, understand, and obey all of the items in this section to avoid possible injury to
yourself or others, or damage to the appliance.
Follow the guidelines below to avoid possible damage to the system or injury to yourself:
•
Install this product in a Restricted Access Location only, such as dedicated equipment rooms, service
closets, and so forth.
• You must provide proper grounding from the chassis to an earth ground. Ground conductor is 12 AWG
minimum and is connected from the earth ground stud to the rear of the appliance. The safety ground
conductor should be connected to the chassis stud on the rear of the appliance, terminated with a
closed-loop ring terminal (Digikey catalog part number:
920010 - 09 -ND; 3 M part number: MVU 10 - 8 RK).
Refer to the instructions provided with terminals for crimping tools and assembly instructions.
A qualified electrician must make all connections to electrical power and safety grounds. The server
must be safety grounded at all times.
• Use power cords that include safety certifications. The power cords must be compliant with the voltage
requirements in your region. Power cords should be
18 AWG in copper and approximately 6 feet in