To hear the chair voice response when you select an Auto Massage Program or Acupoint
detection on the remote control, turn the Response button located on the back of the
chair to On (
I
).
See page 12 for more information.
www.interhealth.com
6
READY
GET
Your HT
™
-1650
comes fully assembled —
simply connect the power
cord and plug it in. Install
the head pillow and/or Luxury
Ergo Pillow, if you wish, and
you’re set to go!
2. Install the head pillow
Place the head pillow flap over the top of the headrest to secure the headrest
in the desired position. The head pillow automatically stays in place, due to the
weighted pillow flap.
Unpack the box
Chair
4. Power on
7
3. Place the Luxury Ergo Pillow
You may want to place the Luxury Ergo Pillow at the base of the backrest, as
the pillow helps to position your body properly for calf+foot massages.
Turn the power switch to On (I). The LED lights to confirm that
the chair is receiving power.
Power panel
1. Connect the power cord
Plug one end of the power cord into
the power panel AC power jack and the
other end into a 110-volt wall outlet.
The HT
™
-1650 control panel offers a
convenience outlet
,
which enables you to plug in a low-wattage appliance such as
a lamp or laptop. Do not plug in appliances that use wattages
higher than 1 AMP, such as a vacuum or a hair dryer.
Power cord
Luxury Ergo Pillow
Neck pillow
