www.interhealth.com
7
6
READY
GET
Your HT
™
-135
requires some simple assembly
(no tools required). Just install
the backrest pad, the seat pad
and the head pillow, and you’re
set to go!
1. Unfold the chair
Remove all packaging materials from the chair.
Pull up on the backrest to unfold the chair to an
upright position. The backrest locks into place
automatically.
2. Install the backrest pad
Attach the backrest pad to the backrest using the hook and loop
fasteners on the top of the backrest and backrest pad. Smooth
the two flaps on the bottom of the backrest pad under the bottom
of the backrest. The flaps attach to the backrest using the hook
and loop fasteners. Attach the flaps on each side of the backrest
pad to the backrest, using the hook and loop fasteners.
5. Install the head pillow
Flip the flap on the back of the headrest up
and over the top of the chair. Attach the head
pillow to the flap using the hook and loop
fasteners. Adjust the head pillow height for
maximum comfort.
Unpack the box
Chair
Seat Pad
Backrest Pad
Head Pillow
4. Install the seat pad
Use the remote control Leg Up setting to raise the footrest to a horizontal position. Attach
the seat pad to the back of the seat, using the hook and loop fasteners. Wrap the flap on
the front of the seat pad around the chair frame and attach it to the top of the chair frame
using the hook and loop fasteners.
3 . Power on
Plug the power cord into a grounded 110 VAC power source. Turn the master power switch
(on the bottom center of the chair back) to On.
