Inter-Tel INT3000, Руководство пользователя

Страница: 17 / 88

FINDING YOU
R
W
A
Y
5
INT3000 Cordless Telephone User Guide
CALL Key
These keys are used for call access. They are not associated with specific lines.
Instead, they are assigned to calls in the order that the calls are placed or received. If
there are more calls in progress than there are CALL keys, new calls wait until a
CALL key becomes available. Pressing an unlit CALL key will enter the programmed
Outgoing Call feature codes for your phone.
Range Limits
If the Handset is at (or beyond) the range limit of the INT3000, you may see a NO
SERVICE message.
•
If you are in standby mode, you cannot make or answer calls (the phone may ring
intermittently) until you are back within range of the Base Unit.
•
If you are on a call, you hear a warning tone. Move back into range within 20
seconds.
Feature Keys
The keys on your INT3000 are arranged according to a programmed “keymap.” Your
customer service representative, trainer, or system administrator can tell you if your
keymap is different from the layout described in this guide. You can use the diagrams
on the following two pages to note any differences. Some optional feature keys that
you may want to request include:
•
Scrolling Keys: If you want to be able to scroll through displays, you need PRE-
VIOUS and NEXT keys.
•
Message Key: If you want to leave messages while on a call, scroll through wait-
ing messages, and switch between numeric and alpha characters when entering a
do-not-disturb message or using the directories, you need a
MSG key.
•
Forward Key: If you use custom do-not-disturb messages or directories, you
will want a FWD key for leaving spaces and for entering two consecutive letters
that appear on the same dialpad key. The FWD key is also used for forwarding
calls.
•
User-Programmable Keys: You may want most of the keys to be user program-
mable to allow you to choose the feature codes or extension numbers you dial.
If your INT3000 has been reprogrammed by the installer so that its feature keys do
not match the feature keys described in this user guide, refer to the administrator’s
guide for your phone system for procedures on using feature codes. Default feature
codes are listed on the back of this user guide.
The feature keys on your INT3000 are equipped with lamps. The flash rates of the
lamps indicate the status of the lines, phones, and features assigned to the keys. The
flash rates and their meanings are explained throughout this user guide. For more
detailed flash rate information, refer to your telephone system owner's guide.