Connection to the controller
1-5 Combined 3Pin connector for fan
and 4Pin connector for RGB light
6 Input for PWM signal from Mainboard
(CPU fan connector)
7 Power input (Floppy plug)
8 Connection for switch
You can connect 4pin RGB fans as well as normal RGB strips
Please take care of the connection scheme.
Wrong connection can damge the controller.
After switch on the computer the light control is in Off-mode.
Press the switch once to switch on.
All LEDs will shine white first.
Each push onto the switch will change the mode.
The following modes are available: White, Blue, Yellow, Red, Green, Orange,
Purple, Fading, Flashlight with color change.
To switch off the light press the switch for more than 3 seconds.
Computer restarts always
The switch don´t work.
Neither fan nor light works.
Check if the Mainboard CPU Fan connector is connected to plug 6 of the controller
Check if the switch is connected to plug 8 of the controller.
Check if plug 7 of the controller is connected to the power supply and the power supply is on.
FAQ
Inter-Tech Elektronik Handels GmbH - Hainhäuser Weg 93 - 30855 Langenhagen - Germany - www.inter-tech.de
Содержание M-908
Страница 1: ...M 908 Manual...
