Inter-m VQD-1404, Руководство по эксплуатации

Страница: 5 / 16

3
VQD-1404(QUAD SWITCHER)
2
VQD-1404(QUAD SWITCHER)
This sign is provided to alert the user to the
presence of possible hazards that could cause
serious injury or even death.
This sign is intended to alert the user to the
presence of possible hazards that could cause
personal injury or property damage.
This sign indicates practices considered ‘unacceptable’ during use
of the product.
This sign illustrates mandated practices during use of the product.
When smoke or abnormal heat emission
is detected, stop using the product.
Do not install the product in places
subject to temperature extremes.
It can result in fire. In this case, stop using the
product and refer servicing to a local agency or the
Customer Service Department
in the headquarters.
Installing the product in a hot(at +60°C or above)
or cold(at -10°C or below) place can degrade the
product performance or cause the abnormal
operation. Thus, the user should pay special
attention to ventilation especially
when installing the product
in a hot place.
Do not drop the product or apply severe
shocks or vibrations.
Do not position the product near
magnetic or inflammable materials.
It will damage the product or may cause
failure.
It will damage the product or may cause
failure.
Keep the product away from direct sunlight.
Do not install the product in dusty or
damp places with poor ventilation or
places with oil or gas.
Do not grasp or pull the power cord or
plug with wet hands.
When the cord or plug is damaged or frayed,
it can cause fire or electric shock. It will cause the abnormal operation of the product or
result in a risk of electric shock or fire.
Do not place the product in unstable places
with vibration or on a slanted surface. Do not dissemble the product or insert
undesired foreign substances.
It will result in the abnormal operation
of the product and fire.
Always use the designated power supply.
Install the product away from rain and
other wetting sources.
Failure to use the proper power supply could result
in fire, electrical shock, serious
injure and/or damage.
POWER
SUPPL
Y
When water penetrates into the product, it
can cause abnormal operation.
Use a dry cloth to clean the product.
When cleaning the product, apply wax onto a dry
soft cloth, wipe the product gently and clean
it with cotton flannel.