5
PT-9107SD
STEREO TUNER
Front Panel
Front Panel
1. MEMORY BUTTON
The MEMORY button is used to store the frequency of a broadcast station. To manually store station
settings, tune in the desired station, press the MEMORY button and then a memory number 1-20, and
then press the MEMORY button again. This is a time-critical operation and it must be completed with a
few seconds.
The MEMORY button also functions as the AUTO SCAN/Memory Store key. When depressed and held
for more than 2 seconds, it automatically scans the entire FM band memorizes the first 20 signals and
then repeats this process in the AM band.
2. PRESET BUTTON
Pressing this button and the MEMORY button simultaneously will play the memorized setting for 5
seconds.
3. MODE PRESET/TUNE BUTTON
This button selects between the PRESET mode and TUNE mode. In the PRESET mode the up/down button
will change to the next channel. In the TUNE mode the up/down button will change to the next frequency.
4. MEMORIZED FREQUENCY SELECTION BUTTONS
This allows for as many as 20 station presets to be stored and recalled from memory.
To select channels 1-9 simply depress the desired button. For channels 10-19 simply depress number 1
and then the other number within one second. For channel 20 simply depress the number 2 and then 0
within one second.
5. VOLUME CONTROL
This determines the level of the output signal (of the variable outputs only). The level increases as you turn
it clockwise and decreases when turned counter clockwise.
6. POWER SWITCH
This switch turns the AC mains ON/OFF. When in the ON position, the power switch will illuminate.
VOLUME
MAX
MIN
DOWN
UP
6
1
7
2
8
3
9
4
0
5
PRESET
SCAN
MEMORY
OFF
ON
PT 9107SD
STEREO TUNER
AM
MONO / ST
FM
MODE
PRESET/TUNE
MONO
MHz
KHz
6
5
4
3
2
1
7
8
9
10
11
12
13
PT-9107SD_E 2003.10.27 9:58 AM 페이지8
