Inter-m NPX-8000, Руководство по эксплуатации

Страница: 13 / 24

AudIo MAtrIx Controller
11 nPx-8000
① Press the Menu button to move setup screen. turning SeleCt/enter switch, you can change setup menu.
② Press eSC button in Menu screen to return to standby screen.
2.1 DEVICE INFO
After moving to the deVICe InFo menu, navigate to the menu, and then press the switch to view the device
information.
① rotating the SeleCt/enter switch on the deVICe InFo screen allows you to change the information in
the info column.
②
Pressing the SeleCt/enter switch on the Module InFo screen displays the module selection screen to
confirm.
③
Pressing the SeleCt/enter switch on the In/out Module screen displays the audio input/output
modules installed at rear slot A and B of nPx-8000. rotate the SeleCt/enter switch to change the slot
to confirm.
④
Pressing the SeleCt/enter switch on the exPAnSIon Module screen displays Mr-8000.
⑤
Pressing the SeleCt/enter switch on the etHernet netWorK InFo screen displays the IP address of
nPx-8000.
⑥
Pressing the SeleCt/enter switch on the deVICe InFo screen displays software version of nPx-8000.
⑦
Pressing the SeleCt/enter switch on the FACtorY reSet oK screen displays delete All dAtA oK.
Pressing the SeleCt/enter switch on the delete All dAtA oK screen displays FACtorY reSet
WAIt... and nPx-8000 will be initialization.
⑧
Press eSC button to return previous page.
NPX-8000_MANUAL_140519_FOR.qxp_RFA 2017. 11. 7. 오후 5:50 페이지 11