Inter-m DPA-150Q, Руководство по эксплуатации

Страница: 9 / 16

DIGITAL POWER AMPLIFIER
7
DPA-150Q
4. OUTPUT TERMINAL
Speaker Output Terminal. Before connecting speakers to the unit, be sure to disconnect the AC power cable.
Make certain that the total impedance is not less than the rated impedance indicated.
※
Caution: 1. Make sure that the total impedance does not equal or less than the rated impedance.
2. Do not connects a speaker has lower impedance than rated impedance, it may cause the
problem to unit.
3. Do not put the speaker cable close to input signal cable.
5. OUTPUT VOLTAGE SELECTOR SWITCH
This three-position switch is used to select a output voltage (100V / 70V / 8
Ω
).
CH 4 CH 3 CH 2 CH 1
OUTPUT
10W 10W 10W 10W
....
10W 10W 10W 10W
....
CH 4 CH 3 CH 2 CH 1
OUTPUT
10W 10W 10W 10W
....
10W 10W 10W 10W
....
Speaker Output Speaker Impedance
100V / 66.7
Ω
150W × 4 70V / 32.7
Ω
34.6V / 8
Ω
- When connecting speakers to CH 1, CH 2.
- When connecting speakers to CH 3, CH 4.