Inter-m ARM-911A, Руководство по эксплуатации

Страница: 10 / 36

AUTOMATED REMOTE MESSAGE
8
ARM-911A
(4) Plug the SD memory into the slot.
[NOTE] 1. If the files stored in the SD memory is less than 10 files, then the unit does not initialized and the
display shows ‘NOT ENOUGH FILES’.
2. ARM-911A can play MP3 files.
MP3 : 44.1kHz sampling frequency, 16bit and 64kbps~320kbps bit rates.
3. The built-in SD memory is 2GB.
[CAUTION] 1. DO NOT TURN OFF THE POWER during copying the memory disc, it causes the memory disc
fault.
2. During copy the SD card, no other functions can be used.
3. If take out the front SD memory without making the backup SD memory, then it can not
broadcast the messages. Please first make a backup memory using front COPY button.
4. Be sure to check whether all the copied files are correct when SD card copy is done.
5. The track number of the memory disc is in numerical order.
Save the message files as below. 01.mp3, 02.mp3 ...... 09.mp3 and 10.mp3. It is corresponded
to the Instant Play Buttons. (Optionally, 11.mp3 can be used only for “Use Multiple Contact”
option. please refer to page.20)
6. If the SD memory disc failure happens, then ‘NO DEVICE’ or ‘NO FILE’ displays on the window.
In this case, take out the SD memory and check it with a computer. If it is also fails, then format
the SD memory in a computer or replace the SD memory to the new one. If the error does not
cleared even if formatting or replacing to new one, then consult with the service personal.
7. If the SD memory disk is changed to new one, the SD memory must be formatted with FAT32 file
system and 4096 byte cluster size before use, or not copy function does not work.
3. Telephone Paging
A telephone paging input allows the ARM-911A to be connected to the paging port of a PBX. This allows the
use of any authorised telephone to connect to the ARM-911A to make direct live voice announcements. A DTMF
decoder can trigger any of the 10 messages can be activated using the dial pad of the phone.
Feature DTMF Code Action
1 * + 00 + # Voice paging
2 * + 01 + # Playback Message 1
3 * + 02 + # Playback Message 2
4 * + 03 + # Playback Message 3
5 * + 04 + # Playback Message 4
6 * + 05 + # Playback Message 5
7 * + 06 + # Playback Message 6
8 * + 07 + # Playback Message 7
9 * + 08 + # Playback Message 8
10 * + 09 + # Playback Message 9
11 * + 10 + # Playback Message 10
12 * + 99 + # Paging Cancel