More possibilities for mounting the
sensor...
The LevelMaster 2C can be used on
machines where the controlled axis is the
same as the direction of machine travel (“A”,
above) or where the controlled axis is
perpendicular to the direction of travel (“B”,
above).
Indicate the axis to be controlled as
shown. Machine “A” has the sensor
mounted with its “2” indicator pointing
forward, and controlling the
“Forward/Back” axis. Machine “B” has the
sensor mounted with its “3” indicator
pointing forward, and controlling the
“Cross” axis.
Note that the setup shown at “C” to the
right will function exactly the same as the
setup at “B” above it.
LevelMaster 2C Instructions v0.5 (Grader) (8/7/03)
page 8 of 14
Sensor 2>Forward
Next
Sensor 3>Forward
Next
Control Axis
Fwd/Back Next
Control Axis
Cross Next
A
B
Sensor 4>Forward
Next
2
3
4
1
Control Axis
Cross Next
C
